Description
Aqara Temperature and Humidity Sensor
Aqara Temperature and Humidity Sensor Monitors temperature, humidity, and atmospheric pressure in real time.
No Wiring Required | Temperature and Humidity Notification | 2 Years Battery Life
Support Apple HomeKit & Amazon Alexa
Temperature and Humidity Sensor is compatible with Apple HomeKit and Amazon Alexa. Highly compatible, Temperature and Humidity Sensor can connect with countless smart devices in the world to create your ideal smart home lifestyle.
* Aqara Hub is required to enable this product to work with HomeKit technology.
Historical Data Tracking
Data is tracked in real time. An alert notification will be sent to your phone when abnormal environment is detected.
Aqara Home Automation
Automatically Adjusts Indoor Humidity Level When Used with a Smart Plug and Humidifier.
Advanced Technology
Aqara Temperature and Humidity Sensor adopts an industrial-grade sensor provided by the industry-renowned Sensirion company which has the humidity detection accuracy of ±3% and temperature detection accuracy of ±0.3℃. The production process is strictly supervised to ensure high quality.
Aqara Temperature and Humidity Sensor Specifications
Wireless Protocol:Zigbee
Battery:CR2032
Dimensions:36 × 36 × 9 mm (1.42 × 1.42 × 0.35 in.)
Temperature Range and Precision:-20℃– +50°C，±0.3℃ （-4℉– +122℉，±0.5°F）
Humidity Range and Precision:0 – 100% RH (non-condensing), ±3%
Atmospheric Pressure Range and Precision:30 kPa – 110 kPa, ±0.12 kPa
What’s in the Box:Temperature and Humidity Sensor x 1, Sticker x 1, Quick Start Guide x 1
App:Apple Home app (iOS 10.3 or later), Aqara Home app (Android 5.0 or later, iOS 10.3 or later)
FAQ
How to add the Aqara Temperature and Humidity Sensor to the Control hub?
Move the Temperature and Humidity Sensor close to the hub, open app, go to the Device page of the hub, tap “Add child device”, select “Temperature and Humidity Sensor” and add according to instructions. When the hub makes voice prompts, it indicates that it is added successfully.
Why does the Aqara Temperature and Humidity Sensor fail to connect? How to reconnect?
Possible reason:
1. Operation error. Please add the device according to the adding method again.
2. The device is too far apart from the Hub. Please move the device closer to the Hub.
3. There are too many devices under the Hub.
Why is the Aqara Temperature and Humidity Sensor offline often?
Possible reason:
1. If the device is too far apart from the Hub, please test the distance between the sensor device and the Hub and install the device closer to the Hub.
2. Low battery or no battery. Please replace the battery.
3. The device is installed on the surface and the signal strength is interfered . Please avoid metal surface.
How to verify that the current installation location is proper?
After the Temperature and Humidity Sensor is connected successfully and before it is installed, press the button of the Temperature and Humidity Sensor, if the Hub gives a voice prompt “Connected Successfully”, current location is proper; if the Hub does not give a voice prompt, move the Temperature and Humidity Sensor closer and try again.
1. The distance between the hub and the Temperature and Humidity Sensor should not be too far. Press the reset button before installation. After the hub gives a prompt of normal connection, install the sensor;
2. Paste or simply place it at your desired location;
3. Do not place it at a location exposed to rain or vapor if possible;
4. Do not install it in the refrigerator, kitchen or washroom if possible.
How to reset the Temperature and Humidity Sensor?
If you do not want to use it or you want to add it under other hubs, press and hold the reset button for over 5s until the indicator flashes three times. Then the hub will give a voice prompt “Device Deleted”.
What is the function of the button on the Temperature and Humidity Sensor?
Single press to check the connectivity to the Hub. It will report the temperature and humidity data to the Control hub. Long press to add and reset sub-devices.
Can the Temperature and Humidity Sensor be connected with the mobile phone directly?
The Temperature and Humidity Sensor cannot be connected with the mobile phone directly. Please connect the hub with the mobile phone, and then connect the Temperature and Humidity Sensor with the hub.
