Aqara Water Leak Sensor

Aqara Water Leak Sensor, Requires AQARA HUB, Wireless Water Leak Detector, Wireless Mini Flood Detector for Alarm System and Smart Home Automation, for Kitchen Bathroom Basement, Works with IFTTT

  • 【NOTES】An Aqara Hub is required and sold separately. Requires a secured 2. 4 gigahertz WiFi network connection. The Aqara M2 or M1S Hub can connect up to 128 devices(*use of a repeater such as the Aqara Smart Plug or Aqara Smart Wall Switch(With Neutral) is required).
  • 【FLOOD DETECTION】Whenever the Aqara Water Leak Sensor detects water, it can send an alert to your phone and activate the local alarm on the Aqara Hub to prevent leaks and flooding.
  • 【HOME AUTOMATION】Controls and triggers Aqara connected devices when excess water is detected.
  • 【WIRELESS & SENSITIVE】No wiring or screws are required. The ultra mini design allows you to put it anywhere that dripping and leaking could happen. Our water leak sensor is designed with sensitive leak probes which the threshold of the water level is 0.5mm.
  • 【INDUSTRY-LEADING QUALITY】Durable IP67 water-proof housing with rust-proof exterior coating. In addition, If you have any questions, please feel free to contact us.
$25,99

Aqara Water Leak Sensor

Aqara Water Leak Sensor Detects flood and protects your property.

Triggers Aqara Hub Alarm and Push Notification | IP67 Dustproof and Waterproof Rating

Aqara Water Leak Sensor

Aqara Water Leak Sensor

IP67 Waterproof Rating

Water Leak Sensor meets IP67 dustproof and waterproof rating.

It is guaranteed to work in humid and dusty environments.

* Aqara Hub is required to enable this product to work.

water
apple

Smart Control in Apple Home App

Works with other HomeKit-enabled accessories in Apple Home app to make your life easier.

Automatically Turns the Water Off When Used with Solenoid Water Valve

After detecting a leak, the Sensor triggers the Aqara Smart Plug to turn off the solenoid water valve instantly.

* This scene requires a solenoid water valve and an Aqara Smart Plug.

water
Aqara Water Leak Sensor

Triggers Alarm When Flooding is Detected

When the water level reaches up to 0.5mm, the Water Leak Sensor will trigger the Hub to sound an alarm and send a notification to your phone.

Advanced Technology

The outer shell is made out of anti-UV material and protects the sensor from discoloration.

The sensor is also energy efficient and one battery can last over 2 years under normal usage.

Aqara Water Leak Sensor

Aqara Water Leak Sensor Specifications

Model:SJCGQ11LM
Battery:CR2032
Wireless Protocol:Zigbee
Dimensions:50 × 50 × 15 mm (1.97 × 1.97 × 0.59 in.)
Operating Temperature:-10℃– +55°C (14℉– +131℉)
Operating Humidity:0 – 100%RH
What’s in the Box:Water Leak Sensor x 1, Quick Start Guide x 1
App:Apple Home app (iOS 10.3 or later), Aqara Home app (Android 5.0 or later, iOS 10.3 or later)

FAQ

What functions does the Water Leak Sensor have?

The Water Leak Sensor can detect a water leak or water immersion. When the water leak or water immersion occurs, it sends an instant alert notification via the app. It can also interact with other smart accessories with the Aqara Hub.

How does the Aqara Water Leak Sensor work?

The Water Leak Sensor makes use of the electrical conductivity of water. When two probes come into contact with water, a current loop is formed. At the same time, the sensor reports water leak/water immersion status to the Hub and thereby triggers the alarm or interacts with other smart devices to perform related operations.

How does the Aqara Water Leak Sensor communicate with the Aqara Hub?

The Water Leak Sensor communicates with the Hub through the Zigbee wireless protocol. Zigbee technology is a short-distance and low-power consumption wireless communication technology. Compared to other communication protocols, it has the following advantages:
1. Ultra-low power consumption.
2. High security.
3. Accommodates more accessories.

What if I can not connect the Aqara Water Leak Sensor to the app ?

1. Check to see if the hub’s firmware version is up to date.
2. Check if the hub is already in the pairing mode.
3. Check if the sensor is reset successfully, and the LED indicator is blinking as expected.
4. Keep the sensor as close as possible to the hub and keep trying.
5. Try with another child device to see if there is something wrong with the sensor itself.
6. Try with another hub and see if there is something wrong with the previous hub.
7. Please be aware that we can add no more than 32 child devices to a hub at the same time.

Why does the Aqara Water Leak Sensor not work sometimes?

1. The Aqara Hub might be too far away from the sensor. Press the reset button of the sensor at the installation location. If the Aqara Hub makes voice prompts, it indicates the Aqara Hub communicates effectively with the sensor. If not, please move the sensor closer to the Aqara Hub.
2. Low battery or dead battery. Please replace the battery.
3. The accessory is installed on a metal surface and the signal is interfered with. Please avoid metal surfaces.

Can the Aqara Water Leak Sensor be connected to the mobile phone directly?

The Water Leak Sensor cannot be connected to the mobile phone directly.
An Aqara Hub is required, please connect the Aqara Hub with the mobile phone, and then connect the Water Leak Sensor to the hub.

What are the requirements for installation of the Aqara Water Leak Sensor?

Installation of the Water Leak Sensor is easy. You just need to place it on the surface that needs to be monitored.

Is the Aqara Water Leak Sensor waterproof and dustproof?

Yes. The Water Leak Sensor meets international IP67 dustproof and waterproof level and plays a protective role in short-term water immersion.

Where is the button on the Water Leak Sensor?

The button of the Water Leak Sensor is located at the center of the shell. Trigger the button by holding the top and bottom cover and pressing the “Water Drop” icon.

At what water level can the alarm be triggered?

The alarm can be triggered when the water level reaches up to 0.5 mm (0.02 inch).

Where is the antenna of the Water Leak Sensor?

The Zigbee antenna of the Water Leak Sensor is located right under the “Water Drop” icon.